212cc Zongshen Electric start engine 5 speed Manual
We will say this is a brilliant road going engine, an overall solid feel with a constant pull right through the rev range, a bit like a diesel !With the 5 speed box and 3 selector forks it’s very positive up and down the gearsWhat’s in the kit1 x CDI Easy start 4 pin 1 x complete ignition wiring kit with lights
1 x Kickstarter
1 x Shift lever
1 x Intake manifold With rubber, gasket and bolt kit1 x PE 28 style carb pre jetted1 x Extra hard push rod, lighter clutch feel1 x Up rated selector Pawl
TECHNICAL FEATURESEngine 212cc 4-stroke, 2-valve, horizontal cylinderBore and stroke: 66x62Displacement: 212ccMax power: 26 / 9500 rpm @ Crank shaftRoller rockersInlet valve 30mmExhaust valve 26mmStems 5mmCompression ratio: 11: 1Max torque: 14Nm / 8000 rpmManual 5 speed 1-N-2-3-4-56-disc clutch in oil bathInternal oil filter cartridgeElectric starter / kick starterAuto de compressor Engine DimensionsStandard Honda mountings 155mm centres diagonally measured.Top mount width 93mmBottom Mount width 83mmTo suit 8mm mounting boltsOverall length of engine 450mmOverall width of engine 340mm Please noteMake sure you have set up the clutch adjustment correctly and that you have a lever that will give you enough throw to disengage the 6 plate clutch.Due to the engine runs 20/50 oil there is a lot of drag on the plates and the up rated selector paul makes the gear selection stiff, this dose get better with use and with heat in the oil..We don’t recommend using the kick start, there is a risk that kicking in the wrong place it will kick back and damage the output shaft.Kick start gear’s or output shafts are not covered by the parts warranty as it down to rider error if this fail WiringMake sure you have a heavy negative cable from the battery to the engine block, if you don’t this will result in melting the lighter weight wiring. Must run 20/50 - Summer & 10/40 - Winter Mineral oil onlyExhaust must be a minimum bore of 25mm up to 30mm with no restrictions; restrictions will cause the engine to bog down and over heat.Engine should be fitted by a professional for safety and that there are minor wiring conversions to be done with ignition and charging.All engines are covered by parts only “excluding kick start component” warranty, not labour see terms and conditions before buying.
